1.Product Introduction of the Flame Resistant Coverall
This flame resistant coverall made of 260gsm cotton flame resistant fabric, and can meet EN ISO 11611, NFPA2112 and other standards.
This flame resistant coverall can self-extinguishing when leaving the fire, without molten drop, char length can be controlled within 10cm, soft touching, good strength, good wear resistant property. And the formaldehyde content can be controlled within 75ppm which is better environmental protection, prevent human body from hurts.
The flame resistant coverall mainly used in oil & gas/ chemical/ gas station/ mining/ welding/ repair such field.
1. The collar of jacket, closure, shoulder, pocket, cuff, waistline, the pants outside seam, front rise and back rise all are threaded by double stitch to makes the flame resistant coverall stronger.
2.Product Details of the Flame Resistant Coverall
This flame resistant coverall has the following features:
2. Two pocket with flap on the chest, closed by snap button, which can avoid the chippings splash into the pocket and harm the skin.
3. 5# two-way front metal zipper for front opening to the collar, with belt on waistline, improving the safety performance of the garment greatly.
4. All pockets and force bearing points of the flame resistant coverall are fixed by bar tacks to increase the coverall durability.
3.Product qualification of the Flame Resistant Coverall
4.Product Specification of the Flame Resistant Coverall
AGAINST PERSPIRATION ACID / BASIC
5.Factory of the Flame Resistant Coverall
6.Deliver,Shipping And Serving of the Flame Resistant Coverall
7.Serving of the Flame Resistant Coverall
Guarantee quality and delivery time
Calling for Feedback regularly; 24-hours online consultant
Provide knowledge of Product Maintenance
Provide third-party testing if you have any objection when you received the products